A Step-by-Step Guide to Replacing Glass in A Window

Maintaining your home often involves tackling various repair tasks, and one common issue homeowners face is the need to replace a broken or damaged window pane.

In this quick tutorial, we'll guide you through the process of replacing dual pane glass in a typical aluminium window frame.

This straightforward DIY project can save you time and money, requiring just a few basic tools and a little patience. It's our little secret.

(Of course, if you're seeking a professional and live in Brisbane, feel free to reach out to us at JRC and we'll happily assist you with your glass replacement)

Step 1: Cutting the Glass

The first step involves safely removing the damaged glass from the window frame. Using a thin putty knife, utility blade, or utility knife, carefully cut along all four sides of the glass.

Be cautious not to crack the glass during this process. Once the seal is cut, move to the outside of the window to gently pop the glass tops off.

Step 2: Removing the Glazing Bead or Glass Stops

To proceed, the glazing bead or glass stops need to be removed. Employ a 501 tool, metal scraper, or flathead screwdriver to carefully detach all four stops.

It's essential to remember to remove the top stop last to prevent the glass from falling out. If necessary, use a suction cup or hold the glass by hand while gently prying it out of the frame.

Once removed, you'll have your dual-pane glass ready for the next step.

Step 3: Scraping and Sealing

With the old sealing or tape removed, the frame should be cleaned thoroughly. A 501 tool, chisel, or flathead screwdriver can be used for this purpose.

After cleaning, apply new double-sided tape or clear silicone to the frame. Peel the corners of the double-sided tape and fold them inwards for easy removal after the glass is set.

Alternatively, apply clear silicone directly to the frame if you don't have double-sided tape.

Step 4: Installing the New Glass

Place the bottom of the new glass on setting blocks and centre it in the frame.

If working alone, consider using a top piece of stop to hold the glass in place. On the inside, peel the tape or have someone assist you while setting the glass in place.

Gently push on the glass to ensure a proper seal to the frame.

Step 5: Securing the Glass

Reinstall the glass stops by pushing and snapping them into place. If needed, use a wood block or plastic material to tap them in without scratching the glass.

Repeat this process for all four sides. Once the stops are securely in place, clean the glass, and your window replacement job is complete.

Congrats, Glass Successfully Replaced!

Congratulations! You've successfully replaced the glass in your aluminium window frame.

This easy 15-minute DIY project not only saves you money but also enhances the longevity of your windows.

Professional Glass Replacement in Brisbane

If you are in the Brisbane area and looking for expert glass replacement professionals, JRC Glass Solutions is your go-to team!

Highly experienced, qualified, certified, and licensed, you can trust our glass replacement experts to quickly and flawlessly replace the glass in your windows.

Contact our team today for a free quote!

‍